2001 Polaris SLH, Virage PWC Factory Service Manual, Page 28Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 28

Maintenance General LubricationContinued Drive Shaft Lubrication WARNING The plastic driveshaft shroud is designed to protect
Driveshaft splines should be lubricated during pre-season maintenance, every 100 hours, or when pump is disassembledSealing
O-rings at impeller end and inside coupler should be inspected and replaced if worn or damagedRefer to Final Drive section
for driveshaft removal procedureUse Premium All Season GreaseLubricate O-ring and Splines Bonded Rubber Coupler Forward Bearing
Housing Using grease gun with needle tip adaptor (PN 2871174) lubricate bearing housing at grease fitting until grease purges