2001 Polaris SLH, Virage PWC Factory Service Manual, Page 31Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 31

Maintenance Electrical ComponentsContinued Battery Installation WARNING Always connect battery cables in the order specifiedRed
Apply dielectric grease to each cable end and to terminal post areaReinstall battery cover and electrical box over battery
and reconnect straps 8Verify that cables are properly routed 9Verify that vent hose is not kinked Battery Storage 1Remove
batteryClean casing and terminals with baking soda and water (one tablespoon of baking soda to one cup water)Apply dielectric
grease to battery terminals and all exposed cable connectors2Top off battery with distilled water and charge to specific
gravity of 1.270 (test each cell)Recharge monthly as required to prevent battery discharge, sulfationand freezing3Store battery