2001 Polaris SLH, Virage PWC Factory Service Manual, Page 33Get this manual
Maintenance Electrical ComponentsContinued Spark Plugs 12Disconnect high tension leads and remove spark plugs Inspect electrodes
not be used4Measure gap with wire gauge and refer to specificationsAdjust if necessary by bending the side electrode carefullyCoat
spark plug threads with small amount of anti-seize compoundInstall spark plug and torque to 18ft.lbsMake sure spark plug
caps are screwed completely onto end of plug wire Spark Plug Gap Spark Plug Gap 2001 700 LE Engines: NGK BPR8ES Gap: .024.028
in(.6.7mm) 8Apply small amount of Nyogel TM grease to inside of plug caps and installo o Push cap onto plug until cap "snaps"