2001 Polaris SLH, Virage PWC Factory Service Manual, Page 66Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 66

EngineCooling 2001 700 Engine Torque SpecificationsSLH Virage Engine Fasteners Air Intake Cover Nut Air Intake Cover Studs
242 Loctite 271 Loctite 262 7Nm 12 Nm 12 Nm 12 Nm 12 Nm 12 Nm 24 Nm 30 Nm 27 Nm 43 Nm 24 Nm 12 Nm 30 Nm 12 Nm 12 Nm 108-136
Nm Flywheel Nut Flywheel Cover Bolts Oil Pump Mounting Bolts Crankcase Bolts 8mm 10mm Mounting Plates to Engine Bolts Mounting
Plates to Hull Bolts 9ft.lbs5ft.lbs 22ft.lbs28ft.lbs50ft.lbs14ft.lbs 12 Nm Nm 30 Nm 38 Nm 68 Nm 19 Nm NOTES: 271 indicates
use of Loctite 271 or 262 thread locking agent (red) 242 indicates use of Loctite 242 thread locking agent (blue)AS indicates
use of Anti Seize compound Grease indicates use of light coating of grease Size 141 to 781 micro hose clamps torque to 10-12
inIbsSize 1 and larger hose clamps torque to 20-25 inIbsCAUTION: Do not install fasteners dryAlways clean fasteners before
reusingCure time of locking agent is reduced when Loctite Primer-N or Primer is used to clean and prime fastener threadsTo