2001 Polaris SLH, Virage PWC Factory Service Manual, Page 88Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 88

EngineCooling Engine Inspection 700cc EngineContinued 2Check each cylinder head for warping as shown Replace cylinder head
if bore is out of roundRepeat measurements at bottom of cylinder to determine taper or out of round at the bottomRecord all
measurementsNOTE: If cylinders are worn or damaged refer to page 3.28-3.29 for boringhoning and port chamfer information
3 Clean needle bearing in solvent and dry with compressed airInspect needle cage carefully for cracks or shiny spots which