2001 Polaris SLH, Virage PWC Factory Service Manual, Page 151Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 151

CarburetionExhaust Reed Valve Removal 1Remove air box inlet and hose clampRemove air box cover and screen Remove (9) intake
air leaksRemove reed stuffers, reed gaskets, assembly, and lower reed gaskets Reed Valve Inspection Thoroughly inspect condition
of reed valve stuffersreed valves and gaskets Replace if necessaryReed valves are sometimes held open by carbon or other
small particlesRemove screws from reed stopRemove the reed, making sure not to flip the reed if it is to be re-used Reverse
positioning of reed will cause breakage Wipe reed cage and reed valve clean Reassemble reed, reed stop and screws to cage
and tightenNOTE: If gap of greater than .015" (.4 mm) eXists, replace the reed valve Reed Pedal Clearance .015" (.38 mm)