2001 Polaris SLH, Virage PWC Factory Service Manual, Page 184Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 184

Final DrivePropulsion Intake ScoopRide Plate Removal and Installation Removal 1Re move pump assembly as outlined on pages
grate mating surfacesPrepare mating surfaces by wiping surfaces down with isopropyl alcohol or acetone WARNING: All silicone
residue and must be removed prior to reassemblyAll mating surfaces must be cleaned with isopropyl alcohol of acetoneOne the
installation has begun, it must be finished quickly due to the silicone curing time Never leave your work during this process
Do not allow silicone to sit open for longer than minutes with out attaching component3o o Apply continuous bead of marine
grade silicone to all mating surfaces of the hull, scoop, front and side edges of ride plate, and front and rear sections
of the inlet gratePN 8560054Cavitation may occur if silicone is not continuously applied Marine Grade Silicone PN 8560054