2001 Polaris SLH, Virage PWC Factory Service Manual, Page 208Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 208

HullControl Systems FRC Fiberglass Repair Gel Coat Nick or High Spot Repair 1Lightly sand area using 600 grit paperwater
Mix enough polyester resin and catalyst to complete the repair, following instructions for resin being usedApply resin to
inside of patch area using disposable paint brush Lay in small pieces of shredded fiberglass mattUse the paint brush to force
air bubbles outAdd more resin and move matt aroundNOTE: Pieces of matt between 1" to 2" (2.5 to cm) square work bestKeep
adding matt and resin until patch area is filled up to the original thicknessLet resin cure thoroughlyo 9Remove masking tape
from outside of repair10Remove any high spots from outside with disc grinder11 Fill and smooth any defects with polyester