2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 70Get this manual

2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 70

Maintenance HullControl SystemsContinued Adjustment ProcedureContinued 5Use main cable adjuster nuts to make major adjustmentsAdjuster
Reverse Cable Adjustment The reverse cable does not require periodic adjustmentIf the reverse linkage does not function properly,
inspect the cable for damageInspect all linkage, fasteners, brackets, and pivots for wear or damageWhen new cable is installed
the cable must be adjusted123Place reverse shift lever in reverse positionLoosen cable adjuster nutsAdjust cable until reverse
gate locating collars engage fully into reverse actuator locating slot when slight upward pressure is applied to reverse
gateReverse gate must float in the notch and should not be forced inCheck gate locking by pulling up on gate when in down
positionMove shift lever to forward positionReverse gate must be above water streamTighten adjuster nuts securelySeal the