2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 169Get this manual

2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 169

CarburetionExhaust Carburetor AssemblyContinued Do not force screw past lightly seated or screw andor seat will be damagedOperation
jets in the jet blockRefer to pages 4.4 to 4.6 for jet identification and locations9Install metering diaphragm, and then
the gasketAlign holes in diaphragm and gasket with pins10Apply Loctite 242 to screws and install diaphragm cover with drain
hole facing downwardUse care when to ensure it does not enter the using Loctite carburetor or linkages1M 1M 11Reassemble
accelerator pump assemblyInstall O-ring with flat side facing pump body, (away from cover)12Grease all exposed shafts and