2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 221Get this manual

2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 221

Final Drive Propulsion Bearing Housing RemovalInspectionContinued 2Inspect bushings and seals in bearing housing assembly
metal parts due to electrolysisThe mounting surfaces must be clean and the mounting bolt tight to maintain good connection
between the pump and anode1Periodically inspect anode for excessive wear2Check bolt to be sure it is tightIf the bolt is
loose, remove anode and clean mounting surfaces on pump and anodeApply dielectric grease to bolt threads and contact surfacesTighten
bolt securely NOTE: During preventative maintenance, verify that the anode is tightened securely to the pump housingReplace