2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 222Get this manual

2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 222

Final DrivePropulsion Intake Scoop Ride Plate Removal and Installation Removal 1Remove pump assembly as outlined on pages
all silicone from the ride plate, inlet scoop, pump mount assembly, and inlet grate mating surfaces2Prepare mating surfaces
by wiping surfaces down with isopropyl alcohol or acetoneWARNING: All silicone residue and must be removed prior to reassemblyAll
mating surfaces must be cleaned with isopropyl alcohol or acetoneOne the installation has begun, it must be finished quickly
due to the silicone curing timeNever leave your work during this processDo not allow silicone to sit open for longer than
minutes with out attaching component3Apply continuous bead of marine grade silicone to all mating surfaces of the hull, scoop,