2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 253Get this manual

2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 253

HullControl Systems FRC Fiberglass Repair Gel Coat Nick or High Spot Repair 1234Lightly sand area using 600 grit paperwater
polyester resin and catalyst to complete the repair, following instructions for resin being usedApply resin to inside of
patch area using disposable paint brushLay in small pieces of shredded fiberglass mattUse the paint brush to force air bubbles
outAdd more resin and move matt around NOTE: Pieces of matt between 11 to 21 (2.5 to em) square work best789Keep adding matt
and resin until patch area is filled up to the original thicknessLet resin cure thoroughlyRemove masking tape from outside
of repair 10Remove any high spots from outside with disc grinder11Fill and smooth any defects with polyester auto body filler12Sand