2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 280Get this manual

2001 Polaris SLX, PRO 1200, Virage TX, Genesis, Virage TXi, Genesis i Personal Watercraft Service Manual, Page 280

Electrical Systems MFI Compass calibrationGenesis Genesis i CLOCK SET DISPLAY DISTANCE The electronic compass provides eight
that the watercraft is floating and away from any large metal objects or magnetic sources at the time of calibration1Press
the "MODE" button until "ENGINE HOUR" is displayed2Press "SET" for approximately seconds until "CC SET 1" is displayed3Carefully
align and hold the watercraft in any direction4Press the "SET" keyThe display will now read "SET 2" 5Again, carefully rotate
the watercraft 1800 and face it in the opposite direction6Press the "SET" key The MFI will use these two readings to calculate
the proper calibration and store it in the memoryNOTE: When operating the watercraft, some error may be introduced if the
angle of pitch is different than when calibratedTherefore, for the most accurate readings, make sure the angle of pitch is