2002 Polaris Freedom, Virage, Genesis PWC Service Manual, Page 168Get this manual

2002 Polaris Freedom, Virage, Genesis PWC Service Manual, Page 168

FuelExhaust Carburetor AssemblyContinued 2Install screen and new Orings on inlet needle seatLubricate Orings with Polaris
Do not force screw past lightly seated or screw andor seat will be damagedOperation of the craft with mixture screws improperly
adjusted (too lean) may cause serious engine damageAlways read spark plugs under actual operating conditions after assembly
to verify proper mixture6Lubricate and install inlet needle, lever arm, and springTighten screw securelyInspect lever arm
height outlined on page 4.23 and adjust if necessary7If any jets were removed, install the jets in the jet blockRefer to
pages 4.1 to 4.3 for jet identification and locations8Install metering diaphragm, and then the gasketAlign holes in diaphragm