2002 Polaris Freedom, Virage, Genesis PWC Service Manual, Page 227Get this manual

2002 Polaris Freedom, Virage, Genesis PWC Service Manual, Page 227

HullControl Systems Steering Cable RemovalInstallationAll Models WARNING: Failure to properly install the steering cable
loose, use an adjustablelocking wrench to remove the thruhull nutWARNING: Due to the location of the uppersteering linkage
and bracket, the shroud assembly, handlebar assembly, and topdeck plug must be removed in order to properly remove and install
the steering cable 7To remove shroud assembly, loosen the four mounting bolts, compartment door mounting plate bolts, and
the handlebar assemblyDetach the MFI harness and the pitot hose at the back of the MFIRemove the access plug from the topdeck8With
the access hole open, loosen and remove the jam nuts that secure the steering cable to the topdeck9Turn the steering column
to the leftLoosen and remove the columntosteering cable mounting bolt10Working from the front of the watercraft to the back,
push the steering cable through the rear thruhull openingContinue working the cable out of the watercraft so that the jam