2003 Polaris Freedom, Virage and Genesis PWC Service Manual, Page 146Get this manual
FuelExhaust Carburetor Cleaning 1Thoroughly clean all passages with carburetor cleaner or electrical contact cleanerWARNING
extremely dirty or have buildup of fuel residue, corrosion, or fungusEven small amount of foreign material will reduce the
flow characteristics of jet4Verify all passages and jets are unobstructed by spraying electrical contact cleaner through
the passagesCAUTION: Do not use wire or welding tip cleaners on the jets as the orifice size may be altered5Use low pressure
air to dry carburetor body and all components Carburetor Assembly NOTE: When assembling carburetors, keep in mind the following:!!
Maintain cleanliness at all times, especially watching for paint chips caused by cover removalProper needle valve control
arm level, set to specificationDo not apply pressure on top of the needle valve assembly during adjustmentUse Loctite" 242
to prevent corrosion of carburetor mounting bolts and diaphragm cover NOTE: Precautions must be taken to prevent Loctite"