2003 Polaris Freedom, Virage and Genesis PWC Service Manual, Page 186Get this manual

2003 Polaris Freedom, Virage and Genesis PWC Service Manual, Page 186

Final DrivePropulsion Driveshaft Lubrication CAUTION: Grease the drive shaft coupler, and bearing carrier any time water
be rotatedFollow the instructions below in order to avoid personal injury Driveshaft CouplerBearing Housing Lubrication 1Remove
lanyard cord and lock plate from the engine stop switch2Remove seatRemove battery ground () cable3Loosen clamp holding plastic
driveshaft shroud in place and rotate it 1804Bonded rubber couplers: drive shaft must be removed to grease splinesSee maintenance
guidelines in Maintenance Section, and refer to drive shaft removal in this section5Lubricate bearing housing at grease fitting
until grease purges past the sealsUse only Polaris Premium Marine or All Purpose greaseBonded Rubber Coupler (Must remove