2003 Polaris Freedom, Virage and Genesis PWC Service Manual, Page 219Get this manual

2003 Polaris Freedom, Virage and Genesis PWC Service Manual, Page 219

Electrical Systems Overheat RPM Limiter TroubleshootingFreedomVirage RPM Limiter System Troubleshooting flowchart is shown
No Replace CDI module and re-test1Test reverse switchContinuity should be observed as soon as lever is moved from forward
position2Inspect GrayRed wire on switch for shorts to groundaReplacerepair switch andor wiringRepair wiresterminal board,
or replace reverse limit switch RPM Limiter System TroubleshootingDIt ModelsOverheat and Reverse Limit Please refer to the
Fuel Injection chapter for troubleshooting procedures Warning System TroubleshootingFreedom Push bilge button to power fuel
gauge and warning system when engine is not runningWarning system receives power from Orange terminal(Switched DCV supplied
by LR 505 module To check warning lamp on fuel gauge: Connect PurW and Black together at harnessLight will be lit steady
with no blinkingTo check low oil lamp: Connect Blu and Blk leads at oil sender harnessLight should illuminate and stay onTo
check overheat lamp and limiting function: Connect Tan lead to ground at temperature sensorLight should blink 12 second on,