2003 Polaris MSX 140 Personal Watercraft Service Manual, Page 157Get this manual

2003 Polaris MSX 140 Personal Watercraft Service Manual, Page 157

HullControl Systems Steering Cable Adjustment 1Open front compartment doorLoosen and remove adjuster blockAlign handlebars
specification Straight Edge Nozzle Hull Hull x Distance should be equal at (X) Reverse Cable Adjustment Under normal operation,
the reverse cable should not require adjustmentIf the reverse linkage does not function properly, inspect the cable for damageInspect
all linkage, fasteners, brackets, and pivots for wear or damageWhen new cable is installed the cable must be adjusted1Place
reverse shift lever in reverse position2Loosen cable adjuster nuts3Verify that the gate is in its full down position and
locked4Check gate locking by pulling up on gate when in down position5Move shift lever to forward positionReverse gate must