2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 41Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 41

MAINTENANCE Cooling System Cooling System Flushing and Salt Water Maintenance Flushing the cooling system with fresh water
engine is runningSevere personal injury or death could result Flushing Procedure DIt Flush Kit: PN 2873623 1Attach garden
attachmenthose to Female CouplerHose CONNECT FLUSH KIT HERE 2Snap the male and female coupler togetherDo not turn on water
yet3Start engine and immediately (within 10 seconds) open water tap4Rev the engine intermittently for one minute to completely
flush cooling system5Turn off water tap6When all water has exited the cooling system, turn off the watercraft engineNOTE:
This step should not take longer than 10 seconds7Press button on female couplerhose attachment to separate from male coupler8Wipe
off any water which may have spilled on engine9Perform corrosion prevention steps and fog engine WATER OUTLET MANIFOLD (MSX
140 Shown) External Engine Corrosion Prevention After flushing the engine for off-season storage or after salt water use,