2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 114Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 114

ENGINECOOLING SYSTEMS Engine InspectionAll Engines Crankshaft Truing Lubricate the bearings and clamp the crankshaft securely
strike the shaft at point with brass hammerHIGH .004 (.1mm) HIGH .004 (.1mm) A B NOTE: The rod pin position in relation to
the dial indicator position tells you what action is required to straighten the shaft4To correct situation like the one shown
in the illustration at right, squeeze the crankshaft at point A(Use tool from alignment kit)SUPPORT CRANKSHAFT AT THESE TWO
BEARINGS HIGH .002 (.05mm) HIGH .005 (.13mm) 5If the crank rod pin location is 180_ from the dial indicator (opposite that
shown above), it will be necessary to spread the crankshaft at the position as shown in the illustration at rightWhen rebuilding