2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 145Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 145

FUELEXHAUST SYSTEMS Carburetor Cleaning 1Thoroughly clean all passages with carburetor cleaner or electrical contact cleanerWARNING
flow characteristics of jet4Verify all passages and jets are unobstructed by spraying electrical contact cleaner through
the passagesCAUTION: Do not use wire or welding tip cleaners on the jets as the orifice size may be altered5Use low pressure
air to dry carburetor body and all components Carburetor Assembly NOTE: When assembling carburetors, keep in mind the following:
Maintain cleanliness at all times, especially watching for paint chips caused by cover removalProper needle valve control
arm level, set to specificationDo not apply pressure on top of the needle valve assembly during adjustmentUse Loctitet 242
to prevent corrosion of carburetor mounting bolts and diaphragm cover NOTE: Precautions must be taken to prevent Loctitet
from interfering with any mechanisms, linkages, diaphragms; entering any cavities, hoses, or orificesLoctitet can plug off
passages, or gum up linkages and components1Install Oring, antisiphon valves, and bypass port covers 2004 CarburetedDIt PWC