2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 189Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 189

PROPULSION Pump Specifications Freedom Pump Extension Pump Wedge Stationary Nozzle Impeller (# of blades) Drive Coupler Driveshaft
disassembledInspect condition of coupler whenever greasing bearing carrierVisually inspect drive coupler fingers, and rubber
dampener for cracking or wearMeasure drive coupler squish as outlined on page 5.2Inspect at preseason and at year endGrease
at 25 and 100 hour intervals, (every 15 hours in saltwater)Inspect rubber surround for cracking or wearInspect at preseason,
every six months, and at year endInspect stator cone at preseason and at year endService Limit: .335inInspect at 100 hour
intervalsService Limit: Replace when 50 wornInspect at pre-rideReplace all seals and Orings whenever pump assembly is removed
from watercraftApply grease andor silicone to applicable parts as outlined in this chapterInspect at preride, preseason,
and at end of yearInspect screenspump mounting at preride, preseason and at end of yearInspect at preride, preseason and
at end of yearInspect at preseason and at end of year Driveshaft Bearing Carrier (FreedomVirageVirageGenesis i) Driveshaft