2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 204Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 204

PROPULSION Driveshaft Lubrication CAUTION: Grease the drive shaft coupler, and bearing carrier any time water in the watercraft
instructions below in order to avoid personal injury Driveshaft CouplerBearing Housing Lubrication 1Remove lanyard cord and
lock plate from the engine stop switch2Remove seatRemove battery ground () cable3Loosen clamp holding plastic driveshaft
shroud in place and rotate it 180 4Bonded rubber couplers: drive shaft must be removed to grease splinesSee maintenance guidelines
in Maintenance Section, and refer to drive shaft removal in this section5Lubricate bearing housing at grease fitting until
grease purges past the sealsUse only Polaris Premium Marine or All Purpose greaseBonded Rubber Coupler (Must remove drive