2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 208Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 208

PROPULSION Driveshaft AlignmentAll Models 1Disconnect the NEGATIVE () first, then POSITIVE (+) battery cables from the batteryDO
140) Backup the drive couplers using large pipe wrench or strap wrench and remove the driveshaft using the DRIVESHAFT REMOVALINSTALLATION
TOOL, PN PW46593Remove the driveshaft from the watercraftNOTE: Do not damage the drive coupler fingers6(NON MSX Models) Remove
the driveshaft from the drive coupler(Photo A) 7(MSX 140) Remove the bearing carrier from the pump box(Illustration 2) 8(MSX
140) Remove the PTO spark plug from the cylinder headFeed two to four inches of heavy nylon rope into the cylinderNOTE: Do