2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 209Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 209

PROPULSION Driveshaft AlignmentAll Models 9(MSX 140) Remove the pumpside drive coupler and rubber dampenerUsing pipe wrench
the gasket and oringNOTE: Steps 11, 12, and 13 are only required if you do not have an "extra" Polaris pump stator already
setup with bearings availableIf you already have Polaris stator setup to perform alignment checks, proceed with STEP 15 DRIVESHAFT
ALIGNMENT COUPLER TOOL PW-46592 DRIVESHAFT ALIGNMENT TOOL 2871343 13Mount the stub shaft flats in viceUsing the IMPELLER
REMOVAL TOOL, PN 2871036, remove the impeller from the pump stator assembly(Photo C) 14Carefully lift the pump stator assembly