2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 236Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 236

HULL and BODY Steering Cable Adjustment 1Open front compartment door and then tool kit door2Locate alignment hole on the
of steering nozzle or trim nozzleSee Ill2 Rear View Of Pump Nozzle Place straight edge across horizontal center line of steering
nozzle or trim nozzleIll2 4Measure distance from straight edge to hull on left and right sideBe sure to measure at right
angles to the straight edge and at equal distances from the nozzleThe distance at (X) should be equal when handlebars are