2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 240Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 240

HULL and BODY Steering Cable RemovalInstallationMSX 140 WARNING: Failure to properly install the steering cable can result
nozzleDiscard the nylock nut 4Prior to removing the thruhull nut, loosen, but do not remove, the lockplate nutWith the lockplate
loose, use an adjustablelocking wrench to remove the thruhull nut 5Locate and disconnect the rod end that is bolted to the
steering arm underneath the shroud and top deckDiscard the nylock nut6Remove the jam nut and rod end from the steering cableRemove