2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 250Get this manual

2004 Polaris Freedom, Virage, Genesis and MSX-140 Service Manual., Page 250

ELECTRICAL SYSTEMS Overheat RPM Limiter TroubleshootingFreedomVirage RPM Limiter System Troubleshooting flowchart is shown
No Replace CDI module and re-test1Test reverse switchContinuity should be observed as soon as lever is moved from forward
position2Inspect GrayRed wire on switch for shorts to groundaReplacerepair switch andor wiringRepair wiresterminal board,
or replace reverse limit switch RPM Limiter System TroubleshootingDIt ModelsOverheat and Reverse Limit Please refer to the
Fuel Injection chapter for troubleshooting procedures Warning System TroubleshootingFreedom Push bilge button to power fuel
gauge and warning system when engine is not running Warning system receives power from Orange terminal(Switched DCV supplied
by LR 505 module Connect PurW and Black together at harnessLight will be lit steady with no blinkingConnect Blu and Blk leads
at oil sender harnessLight should illuminate and stay onConnect Tan lead to ground at temperature sensorLight should blink
12 second on, 12 second offEngine should limit at 3500 RPM To check warning lamp on fuel gauge: To check low oil lamp: To