2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 178Get this manual

2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 178

PROPULSION Bearing Carrier Removal The bearing carrier uses sealed bearingsBearing maintenance or lubrication is not required123456From
the reverse of removal with the following exceptions: 1Begin the installation process by installing the aft (Rear) drive
couplerPress coupler firmly into rubber dampener2Mount the bearing carrier to the hull looselyDO NOT torque the mounting
bolts at this time3Carefully insert the driveshaft through the bearing carrier and engage the drive coupler4Have an assistant
hold the drive couplers5Using the driveshaft removal tool, slowly install the driveshaft into the coupler(A drill or air
wrench can be used if set on lowest speed setting 6Secure bearing carrier to hullFollow torque specifications and sequence