2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 184Get this manual

2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 184

PROPULSION Driveshaft Alignment 1Disconnect the NEGATIVE () first, then POSITIVE (+) battery cables from the batteryDO NOT
housingRemove the pump sections4Backup the drive couplers using large pipe wrench or strap wrench and remove the driveshaft
using the DRIVESHAFT REMOVALINSTALLATION TOOL, PN PW46593Remove the driveshaft from the watercraftNOTE: Do not damage the
drive coupler fingers(Photo A) 5Remove the bearing carrier from the pump box(Illustration 2) 6Install small dowel or socket