2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 209Get this manual

2004 Poalaris MSX110, MSX150 PWC Original Service Manual, Page 209

HULL AND BODY Steering Cable Adjustment 1Open front compartment doorLoosen and remove adjuster blockAlign handlebars with
the reverse cable should not require adjustmentIf the reverse linkage does not function properly, inspect the cable for damageInspect
all linkage, fasteners, brackets, and pivots for wear or damageWhen new cable is installed the cable must be adjusted1Place
reverse shift lever in reverse position2Loosen cable adjuster nuts3Verify that the gate is in its full down position and
locked4Check gate locking by pulling up on gate when in down position5Move shift lever to forward positionReverse gate must
be well above the water stream6Tighten adjuster nuts securely7Seal the cable threads and adjuster nuts with marine grade