Bombardier SeaDoo 1990 factory shop manual, Page 32Get this manual

Bombardier SeaDoo 1990 factory shop manual, Page 32

Section 03 ENGINE Sub-section 03 (TOP END) As an additional precautionary measure, rnaqnet can be installed under piston
to allow accessCirclip this sidle not to be removed To remove circlip, insert pointed tool in piston notch then pry it out
WARNING :Always wear safety glasseswhen removing piston circlips Grease expansion sleeve - By turning the spindle, pull out
piston pin until it aligns with the reference mark 587 on the extractor sleeve To extract piston pin, use Piston Pin Puller