Bombardier SeaDoo 1990 factory shop manual, Page 53Get this manual

Bombardier SeaDoo 1990 factory shop manual, Page 53

Section 03 ENGIINE Sulb-Section 05 (BOTTOM END) Connecting Rod Big Elnd Axilal Play Using feeler gauge, measure distance
to the following 13,19, Bearing Apply Loctite 767 Anti-Seize (PIN 293 550 001) on bearing seatsPrior to installation, place
bearings into container filled with oil, previously heated to 75OC (167OF).This will expand bearing and ease installationOr,
as an alternate method, apply heat with propane torch Lay bearing on steel plate, then heat plate through bearing bore until
smoke is noticed from bearing Install bearing carefully on crankshaftCAUTIONImmediately stop heating as soon as smoke is