Bombardier SeaDoo 1990 factory shop manual, Page 82Get this manual

Bombardier SeaDoo 1990 factory shop manual, Page 82

Section FEUL SYSTEM Sub-Section (TWIN ) Turn fuel valve to "OFF" position Disconnect impulse line from tee fitting Disconnect
with MAG or PTO Refer to following illustrationMAG Remove four bolts, lock washers from rotary cover then move carburetors
and rotary cover together on top of engine NOTEOil lines from oil pump don't need to be removed and don't disconnect throttle
cable from oil pump lever DISASSEMBLY 73, Carburetor Linkage Disconnect fuel return line between carburetors and disconnect
linkage from carburetor Unscrew carburetor mount nuts and remove carburetor Fuel return line 31,35,46, Speed Screw, Throttle