Bombardier SeaDoo 1990 factory shop manual, Page 114Get this manual

Bombardier SeaDoo 1990 factory shop manual, Page 114

Sub-section 05 Section ELECTRIICAL (CDICHARGING SYSTEMS) BOMBARDIER IGNITION TESTER The remaining items can be easily checked
reinstall both BROWN wires to engine to complete ground circuit Otherwise engine will not stop when engine stop button or
tether cord are activated 4If engine starts when performing some test, allow it to idle while observing indicator Then, shut
engine off Test Condition All tests are performed on watercraft at cranking speed with spark plugs installedAlways proceed
in the following order 1 Connect tester and clip leads as indicated for each specific test 5After every test that lights
the indicator lamp, reset the indicator circuit by depressing the reset button Analysis of Test Results IndicatorLamp Lights
at Specific Setting1 Output is as specifiedTest results should repeat three times Ilf readings do not repeat, output is erratic