Bombardier SeaDoo 1990 factory shop manual, Page 150Get this manual

Bombardier SeaDoo 1990 factory shop manual, Page 150

Section 08 PROPULSIONDRIVE SYSTEMS Sub-section (PROPULSIONDRIVE SYSTEMS), Ridle ShoeScrewGrate Apply Loctite
sequence Torque to 10 Nm (88 lbfin) From inside of bilge, apply Loctite 732 RTV Silicone293 800 006) on end of screws to
completely seal hull Apply Loctite 242 (blue)293 800 015) on threads of grate screws, install and tighten Torque both front
screws (hexagonal head) to Nmrn (71 lbfain) Double-hp seal toward 50,51, Seal CarrierNeedle Bearing Properly support seal
carrier when installing seals and bearing Push bearing with same pusher used at disassemblyCenter bearing tn longitudinal
axis of housing CAUTIONNever hammer the bearing into its housingSeal carrier Apply Loctite 515 (PIN 293 800 007) all around