Bombardier SeaDoo 1990 factory shop manual, Page 168Get this manual

Bombardier SeaDoo 1990 factory shop manual, Page 168

Section 10 HULLIBODY Sub-section 01 (HULLBODY 1 Install brackets "B" (IPN 291 000 213) to support the rear section of tank
unit ass'y, refer to "PROPULSIONDRIVE SYSTEMS" section 08 Verify tightness of all fuel lines and clamps and pressurize fuel
system For pressurization procedure refer to "FUEL SYSTEM", section 05 Drill (114 in) hole each side storage cover hinge
position as illustrated WARNINGIfany leak is found do not start the engine and correct the leakFailure correct leak could
lead an explosionIf any fuel spillage andor leak had occurred the bilge should be cleaned with hot water and detergent or