Bombardier SeaDoo 1990 factory shop manual, Page 175Get this manual

Bombardier SeaDoo 1990 factory shop manual, Page 175

Section STORAGE 1 COOLING SYSTEM FLUSHING AND ENGINE INTERNAL LUBRICATION Cooling system has to be flushed with fresh water
hose Re-instail dust cap over tee fitting Hemove both spark plugs and spray some SEA-DO0 LUBE into each cylinder Crank the
engine few turns to distribute the oil on cylinder wall Apply anti-seize lubricant on spark plug threads then reinstall them
Procedure Before using flush kit, remove dust cap from tee fitting spigot and attach coupler hose Make sure coupler hose
is properly locked to tee fitting spigot CAUTIONDo not run the engine during the storage period FUIEL SYSTEM To prevent gum
and varnish formation inside components, siphon all fuel from fuel tank or fuel stabilizer, such as STA-BIL(or equivalent),
can be added in fuel tank to prevent fuel deterioration and avoid draining fuel system for storage Follow manufacturer's
instructions for proper use WARNIING :Remove fuel tank cap slowlyFuel may be under pressure and might spray outFuel ils flammable
and explosive under certain conditionsAlways work in well ventilated areaDo not smoke or allow open flames or sparks in the