Bombardier SeaDoo 1992 factory shop manual, Page 55Get this manual

Bombardier SeaDoo 1992 factory shop manual, Page 55

Section 03 ENGINE Sub-section 03 (TOP END) - Firmly hold puller and rotate handle clockwise to pull piston pin REMOVAL OF
broken ringl - By turning the spindle, pull out piston pin until it aligns with the reference mark 587 on the extractor sleeve-
INSPECTION Visually inspect all parts for corrosion damage Inspect piston for damageLight scratches can be sanded with fine
sand paper Inspect plane surfaces for warpage Small deformation can be corrected by grinding surface with fine sand paperInstall
sand paper on surface plate and rub part against oiled sand paperThe inspection of engine top end should include the following
measurements F001 003 105 - Rotate spindle counterclockwise until extracting nut can be removed - Remove spindle and extractor
sleeve from piston pin - Carefully remove the pistonMEASUREMENTS TOLERANCES NEW PARTS Cylinder Cylinder Out of Round CylinderPiston