Bombardier SeaDoo 1992 factory shop manual, Page 151Get this manual
Section 07 ELECTRICAL Sub-Section 05 (MAGNETO SYSTEM) 24,25, Generating Coil and Screw Apply Loctite 242 (blue, medium strength!
magneto, remove the loose elpoxy from harness and unsolder YELLOW and YELLOW BLACK wires here Uncrtmp 26, Battery Charging
Coil To replace battery charging coil : - Heat the armature plate to 93'C (200F around thePosition new coil, crimp and solder
all wires 26,27,Battery Charging Coil and Screw Prior to assembly, apply Loctite 242 (blue, medium strength)Use magneto coil
centennq tool 290 876 922) and install it so that it fits around armature plate before tightening screws screw holes to break