Bombardier SeaDoo 1992 factory shop manual, Page 180Get this manual

Bombardier SeaDoo 1992 factory shop manual, Page 180

PROPIULSION AND DRIVE SYSTEMS Sub-section 01 (PROPULSION AND DRIVE SYSTEMS) Section 08 - Weld the washer to the remaining
it from impeller, this could damage bootBoot must be slipped out of impeller before removing drive shaftInsert screwdriver
blade between irnpelller and flange of bootCarefully pry boot all around to release from impellerTo ease this operation,
apply liquid soap between boot and impeller, as they begin to separate Nut welded on welded on sauare tube Angle bar tswivell
Head of 100 mrn screwwelded against angle bar peak Nut welded against angle bar peak Insert special tool between ride shoe
ribs and hull as shownCAUTIONEnsure lower part of tool sits at least on outer ribs in order reduce applied pressure for removalEnsure