Bombardier SeaDoo 1993 factory shop manual, Page 74Get this manual

Bombardier SeaDoo 1993 factory shop manual, Page 74

Section 03 ENGINE Sub-section 05 (BOTTOM END) Separating ignition housingarmature plate from crankcase -rotary valve cover
(P290 876 298)On PTO side, use ring290 977 490) with ring halves (P290 977 475)On MAG side, use distance ring (P1 290 876
569) and ring (P290 977 490) with ring halves (P290 276 025)NOTETo facilitate ring or distance ring installation lubricate
their inside diameterst Puller290 876 298) MAG side ring halves (PIN 290 276 025) Distance ring, MAG side (PI 290 876 569)
Separate halves by prying at provided lugs F001 003 056 Ring (both side) (PI 290 977 490) Protective cap (PIN 290 876 557)