Bombardier SeaDoo 1993 factory shop manual, Page 132Get this manual

Bombardier SeaDoo 1993 factory shop manual, Page 132

Section 06 OIL SYSTEM Sub-section 02 (OIL INJ'ECTIONPUMIP, REPAIR AND ADJUSTMENT) Pressure Test Proceed as followsFill up
of soapy water on components, bubbles will indicate leak locationNOTETo minimize time of oil system pressurization the oil
reservoir should be quite fullThe system must maintain pressure of 21 kPa (3 PSI) for at least 10 minutesNever pressurize
aver 21 kPa (3 PSI) Vent inlet CAUTIONIf any leak is found, do not start the engine and wipe off any oil leakageFailure to
correct leak could cause serious damage to engine componentsRemove hose pinchers from inlet lines and return line Page: 132