Bombardier SeaDoo 1993 factory shop manual, Page 163Get this manual

Bombardier SeaDoo 1993 factory shop manual, Page 163

Setion 07 ELECTRICAL Su b-Section 05 (MAGNETO SYSTEM)- - Solder the yellow wire in the harness to the white tube protected
13,23, Screw and Armature Plate Position the armature piate on The crankcase, aligning the marks on both partsApply drop
of Loctiw 242 on screw threads and tighten 4sr Ignition 'Coil ConnectRED wire to ignition coil terminal (with sfngle generating
coil)Connect wres to ignition coil, connect BUCK wire with-" symboi underneath coil and WHITEBLUE wire with "+' symbol (with
double generating coill Identification of Magneto Flywheels There are two ways dfferentiate two magneto the flywheelsNippondenso
part number stamped on flywheel is different far each systemFour-wire system flywheel(PNI 290 995 119) Nippondensois 032000-7091Five-wire
system flywheel4P290 995 113) Nipponldensois 032000-80002The glued-in magnets have different angle towards the keyway - Faste,nretaining