Bombardier SeaDoo 1993 factory shop manual, Page 254Get this manual

Bombardier SeaDoo 1993 factory shop manual, Page 254

Section 10 HULLBODY Sub-Section01 (HULLBODY) CONCEPT PAINTING PROCEDURE FULL PANEL AND OVERALL REPAIRS Application Apply
before applying CONCEPT color Sealer US30 2K Sealer, DP Epoxy Primer reduced as sealer or DAS 1980 or DAS 1987 Direct Gloss
Color How to Mix Standard Air DryMix CONCEPT Color 2:1:1two parts color with one part DT Reducer best suited to shop temperatures
and one part DU (below 85OF 5F (29OQ)or DU (above 8' {2g0C)1HardenerStandard Force Dry: Mix CONCEPT Color 2:1:1 Application
temperatures below 85'F (29C use DU Hardener, above 85OF (29OC) use DU 6Medium Solids (MS) Application: For faster film build,
when using solid colors, mix two parts CONCEPT color with half part DT Reducer and one part DU or DU HardenerSelect the DT
Reducer appropriate for shop temperaturePot Life Pot life of ready-to-spray CONCEPT color is six to eight hours at 7Q (2I0C)Medium
solids option is two to four hours at 70 (21C) SPOTPANEL REPAIRS Application Spray medium wet coat of color on the repair