Bombardier SeaDoo 1994 factory shop manual, Page 57Get this manual

Bombardier SeaDoo 1994 factory shop manual, Page 57

Section 03 ENGINE Sub-section 02 (REMOVAL AND INSTALLATION) 6,13, Exhaust Manifold, Screw Apply Loctite 242 (blue)on screw
and sleeve are not damaged and are properly installed into tune pipe supports)CAUTIONDamageto bustlings and or sleeve will
eventually cause stress to tune pipe and may cause crackingApply Loctite 242 (blue) on stud and retaining screw threadsHand-tighten
nut and top screws only and assure that tuned pipe bushing{s) rests against mani foldPre-torque nut and top screws in criss-cross
sequence to about 20 N-rn (15 Ibfmft)Torque side retaining screw(s) to 25 Nm (18 lbfeft) and then torque nut and top screws