1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 20Get this manual

1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 20

_ _COOLING SYSTEM IIANDSJPI_ _ _ Hard water or salt water is harmful to the engine parts; use boiled or distilled water Do
bleeding steps: Lift up the tail of the machine Connect plastic tubes D tightly to the bleed screws on the heat exchanger
Loosen the bleed screws of Heat exchanger Keep the coolant running out until air bubbles disappear, while adding coolant
slowly to the radiator Tighten the bleed screwsBleed screw: Nm (0.6 kg, 4.3 ft Ib) Add coolant to fill the specified level
Loosen the bleed bolt on the water pump housing Keep the coolant running out until air bubbles disappear Tighten the bleed