1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 154Get this manual

1994-2001 Yamaha Venture/V-Max 500 Series Snowmobile Service Manual, Page 154

_ If the float height is not within specification, inspect the valve seat and needle valve If either is worn, replace them
hooks to the projections on the connecting leverand carburetor body,while twisting the spring clockwise approximately 315
degrees Carburetors (No.1, No.4) 5Install: Connecting plate CD (lower) Connecting plate (upper) Screw (connecting plates):
3.5 Nm (0.35 kg, 2.5 ft Ib) Plate the carburetors on surface place with the intake manifold side down, Install the connecting